Tips On How To Extend Smok Pen Recharge Time

smok pen

Tips On How To Extend Smok Pen Recharge Time

The Smok Pen is really a new pen that was created by two guys in California. They wanted to create a cool writing instrument that looked like a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the marketplace by storm.

The Smok Pen includes a built quality that’s just great. I came across that even though it can be an electronic pen the construction is simply as good as the pens that I’ve reviewed. This is because of how they made the top cap. You don’t need to be worried about the cap cracking or breaking on you Smok Valve Pen.

The two biggest differences that separate the Smok Valve from other pens is the shape of the coils and the way that they are built. Generally the coil on a Smok Pen is bigger than on other pens. I believe that they did this on purpose, to help make the pen feel more substantial.

Invest the a look at a Smok Pen, you will notice that your body of the pen is round rather than smooth like other pens. On the back of the pen you will find a little tab that houses the coil. When you press on the tab you can actually turn the heating element on / off. I really liked this feature because it allows me to use the Smok Pen 22 whenever I feel like smoking.

To utilize the Smok Pen you must keep the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it Vape Pen Battery reaches the appropriate temperature you can switch off the heating element. Smok recommends using a 22mm tank. I prefer a larger tank, but that’s just me.

When you put your Smok Pen in to the tank you will notice a indicator light seriously. The indicator light will remain green if you don’t put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do that before putting your e-liquids into the coil heads.

After you have completed this step, it is best to check to see in case you are at the right temperature for the coils to fire. If not then you should turn the power off and try again. Should you be still not satisfied with your Smok Pen then I suggest you take it in for some troubleshooting. This is what I’d call the “troubleshooting process” because sometimes things just usually do not work as they should. I suggest that you perform the next two steps, then go on and check the Smok Pen to see if it still gets the electronic charging port.

Prior to going any further you should remove the battery from your pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You need to loosen this wire using pliers. When you have loosened this wire you can then access the sub-ohm. You need to then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch any of the coils.

When you have placed the sub-ohm tank in to the pen you need to then place the rest of the components including the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery into the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set then you should follow the on screen instructions.

After the Smok Pen has reached the temperature that it needs to reach you should then connect both wires to the positive and negative on the positive post on the Smok unit. You need to then connect another end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to underneath of the Smok’s power switch.

After all the components have been placed into the pen, you should turn the energy on. After the first test run, you should be able to see the battery life indicator light seriously. If you don’t see any sign of life from the Smok Pen, you need to take away the battery from the pen and replace it with a brand new one. For your convenience gleam green light that can be pressed to be able to confirm the battery charging status. When you have done these things and you do not start to see the green light indicating charging, you should replace the battery.